Microsoft ES4649 Manual do Utilizador descarregar pdf (Página 579)

100

101

IP Routing Commands

4-251

clear ip route

This command removes dynamically learned entries from the IP routing table.

Syntax

clear ip route {network [netmask] | *}

• network – Network or subnet address.

• netmask - Network mask for the associated IP subnet. This mask identifies

the host address bits used for routing to specific subnets.

• * – Removes all dynamic routing table entries.

Command Mode

Privileged Exec

Command Usage

• This command only clears dynamically learned routes.

•Use the no ip address command to remove a local interface.

•Use the no ip route command to remove a static route.

Example

show ip route

This command displays information in the IP routing table.

Syntax

show ip route [config | address [netmask]]

• config – Displays all static routing entries.

• address – IP address of the destination network, subnetwork or host for

which routing information is to be displayed.

• netmask - Network mask for the associated IP subnet. This mask identifies

the host address bits used for routing to specific subnets.

Command Mode

Privileged Exec

Command Usage

If the address is specified without the netmask parameter, the router displays

all routes for the corresponding natural class address (page 4-256).

Console#clear ip route 10.1.5.0

Console#

1 2 ... 574 575 576 577 578 579 580 581 582 583 584 ... 673 674

Comentários a estes Manuais

Sem comentários

Microsoft ES4649 Manual do Utilizador Página 579

Comentários a estes Manuais

Manuais e produtos relacionados com Software Microsoft ES4649